Summer is an unpredictable season, wind, heavy rain, high temperature… For the windy season, we have to do a solid-proof wor...

Products

Summer is an unpredictable season, wind, heavy rain, high temperature… For the windy season, we have to do a solid-proof work on the led display. For high-temperature environments, we must do a good job of cooling. That is the erosion of the rainstorm, the LED display screen into the water, how should we deal with it, let’s look at it:


1, prevention work, although the article mainly talks about the treatment of Led screen water, but still need to remind the next to do a good job of prevention, choose a good led display manufacturers, choose a good led display products, in addition, in addition to Fine waterproofing when edging;
2. Pay attention to the use environment, turn off the screen during heavy rain, and suspend use;
3. After the rain stops, check whether there is any water leakage from the back of the screen. If there is, do not electrify, and use other tools such as fans as soon as possible to dry the water in the led display;
4. Aging the dried screen:
(1) Adjust the brightness (all white) to 10% and the power to age for 8-12 hours.

(2) Adjust the brightness (all white) to 30%, and aging for 12 hours.

(3) Adjust the brightness (all white) to 60%, and aging for 12-24 hours.

(4) Adjust the brightness (all white) to 80%, and aging for 12-24 hours.

(5) Adjust the brightness (all white) to 100%, and aging for 8-12 hours.
Do a good job of the above work, the problem of the water in the led screen body is almost solved. In this case, you can check the Led display module, power supply, control card, wire and other issues. If you need to repair, please do the repair work.

Prev:

Leave a Reply

Tel. E-mail Add. Chat
Leave a message