1, switch LED small spacing to pay attention to matters Switching sequence: The switching sequence of the led display has been emp...

Products

1, switch LED small spacing to pay attention to matters

Switching sequence: The switching sequence of the led display has been emphasized: first turn on the screen and then turn on the screen, first turn off the screen and then shut down. Otherwise, when the computer is turned on, first turn on the screen and then turn on the computer. If the current is too large, the screen will be highlighted, and it will easily burn out the lamp. And do not operate frequently every time the switch, the interval is greater than one minute.

2, pay attention to the use of corrosive gas environment, such as near the indoor swimming pool, next to the chemical library;

3, the environmental humidity: can not exceed 70%, otherwise it is easy to get wet;

4, the use of ambient temperature is -10 ° ~ 40 ° C, and not long-term open. The temperature is directly related to the life of the led display, pay attention to

5, the outdoor small-pitch led display installation should not be facing the direction of strong light, in the initial installation to choose the direction, strong light illumination affects the display effect, but also the temperature.

  1. Do not let the screen touch the water and dust. The moisture and debris affect the display period of the led display. If the screen touches the water, please contact the maintenance personnel immediately.

7, do not long-term pure white screen display, will lead to high power consumption, to control the screen display;

8, the screen is closed for at least 2 hours a day, and at least twice a week, and the opening time is not less than 2 hours;

9, do a good job of static electricity protection, install a thermometer, hygrometer in the screen room, real-time monitoring and management screen

Indoor led display installation

Prev:

Leave a Reply

Leave a message